-
Topics
subnavigation
Topics
Electromagnetic fields
- What are electromagnetic fields?
- Static and low-frequency fields
- Radiation protection relating to the expansion of the national grid
- High-frequency fields
- Radiation protection in mobile communication
Optical radiation
Ionising radiation
- What is ionising radiation?
- Radioactivity in the environment
- Applications in medicine
- Applications in daily life and in technology
- Effects
- What are the effects of radiation?
- Effects of selected radioactive materials
- Consequences of a radiation accident
- Cancer and leukaemia
- Genetic radiation effects
- Individual radiosensitivity
- Epidemiology of radiation-induced diseases
- Ionising radiation: positive effects?
- Risk estimation and assessment
- Radiation protection
- Nuclear accident management
- Service offers
-
The BfS
subnavigation
The BfS
- About us
- Science and research
- Laws and regulations
- BfS Topics in the Bundestag
- Links
Quality assurance of radon measurements
The calibration of measuring devices or the regular participation in comparative tests carried out by the Federal Office for Radiation Protection (BfS) are a fundamental requirement for the quality assurance of radon measurements.
Quality assurance requirements for measuring devices and laboratories concerned with the evaluation of measuring devices are laid down in the Richtlinie Arbeiten (Guideline on work activities) and in the Leitfaden "Überwachung von Strahlenexpositionen bei Arbeiten" (Guide to the monitoring of radiation exposure during work activities”). These requirements were in the first instance aimed at measurements performed under Part 3 Chapter 2 of the Radiation Protection Ordinance for the purpose of monitoring occupationally exposed persons. Beyond that, however, the Federal Office for Radiation Protection (Bundesamt für Strahlenschutz, BfS), recommends to apply these criteria to radon measurements in homes as well.
The following should be kept in mind when radon measurements are carried out or arranged for:
Measurements using passive measuring devices
Use of passive measuring devices involves exposure of measuring probes obtained from a laboratory. After exposure, the probes are returned to the laboratory. This latter will determine the level of radiation exposure and communicate it to the person who had arranged for the measurements.
Laboratories for radon measurements based on passive measuring devices have to prove their organisational and professional competence to accomplish their measuring tasks. This can be done either by accreditation through an accreditation body or by approval through the Federal Office for Radiation Protection.
In addition, it is mandatory for the types of measuring devices provided by the laboratories to participate in the annual comparison tests conducted by the Federal Office for Radiation Protection. The table below shows the laboratories offering radon measurements based on passive measuring devices in Germany that have proven to meet the quality assurance requirements.
Laboratory | Address | More Information |
---|---|---|
ALTRAC Radon-Messtechnik | Dorothea-Viehmann-Straße 28 12524 Berlin Germany | www.altrac.de |
Karlsruher Institut für Technologie (KIT) Sicherheitsmanagement Strahlenschutz-Dosimetrie | Herrmann-von-Helmholtz-Platz 1 76344 Leopoldshafen Germany | www.sum.kit.edu/Radonlabor.php |
Landauer Nordic AG Schweden | Vertriebspartner für Deutschland: Radon Analytics Alte Heerstrasse 1 53121 Bonn Germany | www.radon-analytics.com |
Landesanstalt für Personendosimetrie und Strahlenschutzausbildung, Mecklenburg-Vorpommern | Köpenicker Straße 325, Haus 41 12555 Berlin Germany | www.lps-berlin.de/personendosismessstelle/radon.html |
Materialprüfungsamt Nordrhein-Westfalen | Marsbruchstraße 186 44287 Dortmund Germany | www.mpanrw.eu/dienstleistungen/strahlenschutz/sonderdienstleistungen/ |
* Laboratories that are involved in the evaluation of passive measuring devices for radon measurements and comply with the quality assurance requirements but are not named in this table, can be included upon request, if they submit the requested evidence to the Federal Office for Radiation Protection. |
Measurements based on electronic measuring devices (direct reading measuring devices)
With electronic or direct reading measuring devices, the measured value is either displayed on the device, or determined by means of a computer or another electronic device immediately after the measurement. The minimum requirement of quality assurance is to ensure that a valid calibration is available for the measuring device.
A calibration is regarded as valid when it has been performed by an approved calibration laboratory and is not older than two years. The validity of the calibration can be determined by reference to the calibration certificate or the calibration label.
The calibration certificate, issued by the calibration laboratory, includes all relevant data on the measuring device and the calibration tests performed. After calibration, the calibration label is attached to the outside of the measuring device.
State of 2018.07.23